ソラマメブログ

2008年07月16日

S@R Photo Studio Manual (E)

S@R Photo Studio

【Contents】
S@R Camera Controller Pro ( E ) ( J )----------------HUD
S@R Photo Studio Pro ( E ) ( J )-----------------------Pro Studio
S@R Photo Studio Standard Box ----------Standard Studio
S@R Photo Studio Standard Cylinder -----Standard Studio
S@R Photo Studio Standard Plane --------Standard Studio
Update Card S@R Photo Studio
S@R Photo Studio Users Manual ( E ) ( J )
How to use S@R Update Card ( E ) ( J )

---------------------------------------------------------------------------------------------------

Tutorial
   Once you experience how to use as below, it would be easy to operate
   this product.Please read through from top in order. In case you don't
   know how to use later, please check the necessary related heading.

   If you don't know how to control by using our prouct, Please click the
   "Camera Control" button. Then this page will be automatically opened.
   Please check how to use the product.

S@R Photo Studio Manual (E)
---------------------------------------------------------------------------------------------------

【Index of this page】

●Operations with the HUD only

  Camera (Avatar) Control Panel 【Body of the HUD】

●Operations both with the Photo Studio and HUD

 
Studio Control Panel 【Panel 1 which appears under the HUD】

(Concerning the common operations both for Pro ver and Standard ver)

 
Light Control Panel 【Panel 2 which appears under the HUD】

(Operations only for S@R Photo Studio Pro)

 
Studio Control Panel 【Panel 1 which appears under the HUD】

(Concerning the operations for S@R Photo Studio Standard ver)
 
---------------------------------------------------------------------------------------------------

●Operations with the HUD only

Camera (Avatar) Control Panel【Body of the HUD】

【C1.Basic knowledge about the Camera in Second Life】
   There are two kind of the viewpoint in the Second Life viewer.
   One is the basic viewpoint from the upper back of the avatar, and
   the other is the viewpoint that you can change actively with Alt-key.
   Once you operate your avatar again, the viewer try to go back to the
   former viewpoint because of its characteristic.
   It testified that the basic viewpoint takes always priority once you start
   to walk, when you e.g. look at the items in the store.
   Please remember this characteristic of the SL-viewer, when your avatar
   turn around despite of your intention by using this product.

   Though this HUD has the function to control the viewpoint, the controllable
   viewpoint is limited only when you looks from the basic viewpoint.
   To go back from the active viewpoint to the basic viewpoint, please press
   twice the Esc-key. (possibly only one time.)

【C2.Preparation(wear and initialize HUD)】
   Before you use the HUD, please take a copy of "S@R Camera Controller Pro
   in your inventory by all means. So that you can repair easily the HUD,
   in case the HUD is broken.
   After you copied the HUD, Please drag and drop the "S@R Camera
   Controller Pro" on the avatar, then the HUD will be attached on the
   left side of your display.

S@R Photo Studio Manual (E)

【C3.Simple camera control】
   If you press the "Lock" button, the position of the camera and the
   viewpoint direction will be locked. When you would like to go back
   to the initial cameraposition, please press twice the Esc-key
   (possibly once).
   ※the camera information is fixed based on your avatar's position
   and rotation. On this account the camera position may move
   together with your avatar, if the avatar move after you saved the
   camera information. If you press the "Unlock" button, the camera
   position information will be canceled.Please press this button at
   the end of the operation by all means.Otherwise you may have
   trouble to the regular operations at the viewer.

S@R Photo Studio Manual (E)

【C4.memorize and call five cameras】
   If you press one of the "save pos." button, the camera position and
   the viewpoint direction at the moment will be saved. There are five
   buttons, and you can save the different camera informations each of them.
   If you would like to overwrite the camera information in the button, please
   press "save pos." button again.
   If you would like to call the camera information saved in each 1-5
   "save pos." button, please press the equivalent number of the "load pos."
   button to the "save pos" button.
   If the camera information is already saved the color of the button turns
   yellow.If the camera information has not saved yet, the color of the
   button remains grey. Every time if you click each button, in which
   information is saved, the cameras will switch in a flash.

S@R Photo Studio Manual (E)

【C5.Clear the camera information】
   When you press the "Initializ" button, and choose "Clear" from the
   dialog box, the all saved camera information will be cleared,
   thus the all "load pos." buttons will turn grey, which shows they
   are initialized now.

S@R Photo Studio Manual (E)

【C6.Support mode and Silent mode】
   When you press the "initializ" button, a dialog box will appear.
   Please choose"Support", when you need the explanations for
   each operation.We recommend you to use this mode until
   you are used to the operations.The same as above please
   press the "Inizializ" button, then choose "Silent" in the dialog
   box, the explanation messages will not appear. If you are
   already used to the operations or bothers you these operations,
   please try this mode.
   If you use the silent mode, you will find "Support" in the dialog box,
   and if you use the support mode, you will find "Silent" in the
   dialog box.

S@R Photo Studio Manual (E)

【C7.Choose the avatar that you control】
   You can give the poses or expressions to yourself or even the another
   avatar. If you would like to control yourself, please press "self" button.
   if you would like to control the other avatar, please press the "other"
   button.When you choose "other", the 9 nearest abatars from you will
   be shown on the right to of your display. Once you choose a random
   avatar, the person, who are chosen from you, will receive a message
   whether he or she accept the control of the avatar by you in the
   dialog box. If the person accept your control, The "other" button in
   your HUD will blink, and you can now control the other avatar.
   If the person does not accept it, the button will not blink and you
   cannot control the other avatar.

S@R Photo Studio Manual (E)

【C8.strike a pose for the avatar】
   After choosing which avatar you want to control 【pl. see C7】,
   the "pose" button will be active. If you press the up or down index key,
   the pose of the avatar will be changed. Furthermore if you press the
   PageUp or PageDown key, you can skip every 4 poses that you
   saved in the HUD.
   (Please use this function, if you have a lot of poses in the HUD.)
   The name of each pose will be shown in the black frame in the middle.

S@R Photo Studio Manual (E)

【C9.Expression on the avatar's face】
   With choosing the avatar, you want to control 【pl. see C7】, please
   press "face" button, then the color of the button turns yellow.
   During the button turns on, please select a expression which you like.
   The expression will change by pressing the left/right key. If you repeat
   the same expression, please press up/down key.
   Though it is depend of the expression, the expression will keep showing
   during you press the up/down key. Please use this function to take SS
   (Snapshot).
   (Attention) If the camera does not fixed, the avatar may turn back without
   any intention when you press the left/right button. Please choose your
   expression after you fix your viewpoint with the camera lock button.
   The name of the expression will be shown in the black frame in the middle.

   The above-mentioned operation is not appropriated to the smile linked
   eyelashes
   of our "Snow Rabbit Beauty HUD Series" If you choose smile or grin
   by using "Snow Rabbit Beauty HUD Series", please press
   Page UP/Down key on your keyboard.
   Allocation of the function for the a.m. eyelashes are as follows:
     Page UP key → grin + move eyelashes
     Page Down key → smile + move eyelashes

S@R Photo Studio Manual (E)


【C10.Change your avatar's direction】
   If you press the left/right button on your keyboard during you control
   your avatar and pose button is in current (chosen), you can chage
   the direction of your avatar. But you cannot rotate the avatar exactly.
   So please use the photo Studio that I describe later, if you would like to
   rotate your avatar with a numerical value.

S@R Photo Studio Manual (E)

【C11.release the avatar control】
   If you click the "unlock" button, the fixed camera position information
   and all avatar's control will be released, and return to the normal viewer
   function as usual.
   Please press the button at the end of the all operation by all means.
   Please be informed that the avatar controled by you cannot be free,
   as long as you don't press the "unlock" key


S@R Photo Studio Manual (E)

【C12.Add the poses】
   Please rez your HUD on the ground and select edit by clicking the
   right-mouse button then add your favorite pose after opening the
   contents tab.
   Next please take the HUD, and wear it then please initialize the HUD.
   The pose you added will be first reflected after the initialization.
   The number of the added pose name will be issued automatically by the
   HUD, so no need to include the number in the pose name.
   (Attention)Pose name will be shown max. 8 letters with a half-size font
   character.

S@R Photo Studio Manual (E)

【C13.minimize the HUD】
   You can minimize the HUD in an instant by clicking the button in orange on
   the right side of the HUD. If you want to show the entire HUD, please click
   the same button in orange again.

S@R Photo Studio Manual (E)

【C14.mini HUD】
   You can change the HUD to mini HUD specialized only for the camera control
   by clicking the button in light-blue on the right side of the HUD.
   ● enable to save the camera information to keep pressing the button
    number 1-5.
   ● enable to reload the camera information by short clicking the button
    number 1-5.
   ● press the button number 1-5 for a while, if you want to overwrite the
    camera info.
   ● To release the avatar, please click "unlock" button.
   ● Please click the button in light-blue to back to the default HUD.
   ※ If the avatar's pose and expression control has already started,
     you can change the pose and expression despite you are
     using the mini-HUD.

S@R Photo Studio Manual (E) 

【C15.Adjust the position of the HUD】
   If you want to adjust the position of the HUD, please go to edit menu
   with right-mouse click then initialize the HUD after you adjust the position.
   If you don't initialize the HUD, the HUD will return to the default position
   when you expand/minimize the HUD.

【C16.Change your HUD color】
   the dialog box to change the HUD color will appear to keep clicking
   the left-mouse button for a while. Please your favorite color from the
   five different color below.

S@R Photo Studio Manual (E)

【C17. Rename of the HUD】
   If you would like to change the name of the HUD for your convenience,
   please rez the HUD on the ground, and go to
   edit menu by right-mouse clicking on the HUD. Then go to
   general tab. There you can rename the name of the HUD.
   Please note that you cannot rename the HUD directly from
   the inventory folder.

---------------------------------------------------------------------------------------------------

●Operation by using the Photo Studio and HUD

Studio Control Panel 【Panel 1 which appears under the HUD】
(regarding the common operations for both of Pro ver and Standard ver)


【S1.Open the Standard control panel of the HUD】
   Please click the little orange button on the lower part of the HUD.
   The control panel for the photo studio will appear. You can control
   the photostudio with this panel and the buttons in front of the body
   of the Photo Studio.

S@R Photo Studio Manual (E)

【S2.Stand on the Studio】
   Please right-mouse click on the rezzed studio, then choose pose
   from the pie menu. So that the avatar can stand on the photo stand.
   Please turn your AO off all by means.

【S3.Strike Pose / expression】
   choose the avatar 【pl. see C7】
   strike the pose  【pl see C8】
   expressions   【pl. see C9】

【S4.change the background】
   The background picture will be changed by clicking "Texture" button.
   The name of the background picture will be shown in the black
   frame below.
S@R Photo Studio Manual (E)

【S5.Change avatar's direction】
   You can do two kinds of exact rotation with 45° and 5° by
   clicking "Rotate" button.
S@R Photo Studio Manual (E)

【S6.Add the background picture】
   Please right mouse click on the HUD, then go to edit menu.
   Please add any picture that you have into the contents tab.
   Please note that the picture should be with the full permission.
   Otherwise an error will be occur.
   Next please take back the HUD and wear and initialize it.

   When you initialize the HUD, the added picture will be reflected.
S@R Photo Studio Manual (E)

Studio Control Panel
(Regarding the operation of S@R Photo Studio Pro)


【SP1.Change the aspect(length and width) ratio of the background】
   Each time you click on the "Texture Size" button in fron of the body
   of the "Photo Studio Pro", the aspect ratio of the background screen
   will be switched as follows:
   Full size → square → 4:3 → 16:9

S@R Photo Studio Manual (E)

【SP2.Adjust the hight of the background】
   By the clicking『▲』『▼』button on the left side of the front panel
   of the Photo Studio Pro's Body, the background picture will move
   up and down. This is the fine tuning function, so that the
   adjustment will made within the remitted range.

S@R Photo Studio Manual (E)

【SP3.adjust the hight of the avatar's position】
   By clicking the 『▲』『▼』button on the right side of the front
   panel of the Photo Studio Pro's body, the avatar's stand position
   will move up and down.

S@R Photo Studio Manual (E)

【SP4.change the default screen】
   At first you rez the Photo Studio Pro, you will find a logo of
   S@R Photo Studio Pro as the default screen. If the avatar
   sit on the stand, the background picture will be switched to
   the preparated one. if you want to change the texture on
   your default screen to the other one, please go to edit with
   right-mouse clicking on the Photo Studio Pro, and replace
   the picture named "S@R Photo Studio Pro" in the contents
   tab to any picture you like.
   You have the option to name the picture, but the picture
   name should be within 12 letters with the half-size font
   character, nad the picture in the contents tab should be only one.
   If the several pictures in the contetns tab, the Studio may get trouble.
   (Please remain the other files as they are.)
   The ratio of the picture should be as below.
   If the width of the picture is 512 pix, the hight should be 288 pix.
   The Illustration/logo should be within 163 pix hight from the middle,
   and the picture/texture will be finished nicely,
   if the upper and lower part of the picture is in black.

S@R Photo Studio Manual (E)

【SP5.Change the default pose】
   Please replace the pose in the contents folder of the Photo Studio Pro
   to any pose that you have. The pose which is replaced will be the first
   pose, when the avatar stands on the photo stands. Please do not place
   2 poses and over in the contents folder of Photo Studio Pro to avoid any
   trouble with the Photo Studio.

   

Light Control Panel 【the panel 2 appears under the HUD】
(Function only for the S@R Photo Studio Pro)


【L1.Knowledge about the Light source】
   Because of the characteristic of OpenGL, which is used for the SL Viewer,
   the number of the lights that can be reflected at the same time is up to 6
   (excluding sun and moon) on your viewer.
   For this reason we prepares only 6 light-source prims for this product.
   If you use face lights, the all lights in the photo stand may not be reflected.
   The priority of the lights will be ordered from the strength of the lights, that
   reached to the avatar.
   Please seehear 

【L2.Open the stand control panel of the HUD】
   Please click the button in pink lower part of the HUD.
   A operation panel of the photo studio will appear. You can control
   the photo studio with this panel and the buttons in front of the body
   of the photo studio.
S@R Photo Studio Manual (E)

【L3.Set up the Light-set】
   The prims in 6 different colors are the light sources. These light sources
   are linked as the parts of the photo stand in advance.
   To set up the position, Intensity, Color, Radius, Falloff, and ON/OFF,
   please go to edit by right-mouse clicking on the Photo Studio, and check
   "edit the linked parts" then choose the lights separetely to fix the position.
   Regarding the Intensity, color, radius, falloff of the lights, please set up in
   the features tab.
   How to move the prims and set up the light sources are the same as the
   ordinal prim edit.
   We call the convination of the 6 light sources (inclueint the lights turned off)
   【Light-set】for the convenience.

S@R Photo Studio Manual (E)
S@R Photo Studio Manual (E)

【L4.Save the Light-set】
   After you set up the lights (Light-set), please press the button "save light".
   Once you press "save light" button, the position of the lights and viewpoint
   at that time will be saved, and the "load light." button correspondence to
    the number which you want to load will turn yellow.
   If nothing saved, the button stays in grey.
   There are 5 buttons in the HUD, and you can save the different Light-set
   in the each button.
   If you want to overwrite the already saved light set, please press the
   "save light" button once more.
   
   In order to load the saved Light-set, please press the "load light" button
   which youwish to load. If the button is pressed, the lights will switch
   in an instant.

S@R Photo Studio Manual (E)

【L5.Turn off the lights temporary】
   If you press "on/off" button, the lights will be turned off temporary.
   The information of the lights will not be deleted. So that the light will
   be turned on, if you click the button once again.

S@R Photo Studio Manual (E)

【L6.make the lights invisible / Show the color of the light source】
   The prim colors of the attached lights is only for distinguishment, and
   they are not the color of the light source.
   When you press『Hide/Show』button, the color of these prims will
   switch bellow:
   The color to distinguish(default)→ true color of the light source
   →make the light invisible
   Please make the lights invisible, when you finished all setting to start
   the shooting.
   The color of the light source will reflect immediately, but the color of
   the prims will change only you click on the button again.
   Please kindly understand that this is the specifications to ease the
   burden.


S@R Photo Studio Manual (E)

【L7.permanent save the light set(write the note card3)】
   We used to keep the Light-Set for long, if you could setup it beautifully.
   Now you don't need to make any exertion fot the Light Setting each time.
   You can save your own Light-Setting forever with the below-mentioned
   method.

   Please click the "initiariz" button, then choose "export" button in the
   dialog box.Now you will be asked which light information from the button
   1 to 5 should be exported. Once you choose a Light-Set button which
   you want to save, the lightinformation will appear in the local chat field.
   Please copy the all exported information (pls. s. e.g. below), and
   right-mouse click on the HUD. Next please go to edit and open the
   contents tab. There you will find the note cards named "Light 1" to
   "Light 12" saved as default. Please open one of them and overwrite
   the information that you have just copied. After please rename
   the note card for your convenience, (You can name the note card
   up to 24 half-size font characters. Though the name will be shown
   only up to 8 characters in the dialog box for the information loading.)
   then save the note card. In the "Light1" to "Light12" the particular
   Light-Sets are already saved in advance.
   Please load and try them if you like.

   ※You can save or load Light-Set Notes max. twelve in the contents tab
   in the HUD.
   Please save the note cards more than 12 in your inventory folder.

S@R Photo Studio Manual (E)

【A exemplar the exported Light-Set information】
S@R Photo Studio Manual (E)
 ※Please copy the contents in the line from--------Start Light Pos---------
  to --------End Light Pos--------- including time. 

    
【L8.load the saved Light-Set in the note card】
   Please press "initiariz" button and choose "load" from the dialog box.
   Now you will see the list of the available Light-Sets.
   If you choose one of them that you want to load, you will find a dialog
   box and be asked in which button from 1 to 5 do you want to load.
   Please choose a button which you like, then the Light-Set will be
   switched to the loaded one.

S@R Photo Studio Manual (E)
   
   ※The change may not reflected immediately because of the
    characteristic of the SL-Viewer. It is a phenomenon that
    the light is actually moved (incl. the other information reflected)
    but it does not seem to change on the viewer. That means the light
    is already reflected, but the prims don't seem to be moved.
    In such case please move the camera position a little.
    Then you will see also the light source prims on the correct position.



【L9.Initialize the light information】
   Please press the "initiariz" button, and choose "Clear" on the
   dialog box. The lights will be initialized to the initial setting.

S@R Photo Studio Manual (E)

【L10.change the initial information of the light】
   When initializing the lights, they will go back to the upper right of the
   default position and the setting of the Intensity, Color, Radius, Falloff,
   and ON/OFF will be reurned to the initial setting.
   These information excluding the position is written in the note card
   named "light config" in the contents tab of the Photo Stand Pro.
   Please right-mouse click on the Photo Stand Pro and go to edit to
   open the note card, then overwrite
   its contents. So that you can customize the initial setting.
   例)LIGHT1_COLOR=<1.0,1.0,1.0>     
     LIGHT1_INTENSITY=0.5
     LIGHT1_RADIUS=1.0
     LIGHT1_FALLOFF=0.5
     LIGHT1_ON=1

       LIGHT1_COLOR is the color of the light source.
       According to the color change value please see hear
       (Please write the RGB value of the second life on the top
       in the note card.)

       LIGHT1means the first light which is placed on the left side
       by the order of the default setting.
       LIGHT1_INTENSITY=0.5 means the light intensity is 0.5.
       LIGHT1_RADIUS=1.0 means the light radius is 1m.
       LIGHT1_FALLOFF=0.5 means the light falls off (gets weak) 0.5.
       LIGHT1_ON=1 means the light which you want to turn on
               by the originate state is 1, the light
              which you want to turn off is 0.


   
【L11.recovery of the studio】
   You may accidentally move the part of the Photo Studio's Body
   because the lights must be set up directly in the partial edit mode.
   In such case please left-mouse click for a while on the Stand's body.
   the parts of the stand will go back to thier initial position.
   (If you changed the information other than the positon, rotation, or size,
   the studio cannnot be recovered. So that please take a original copy
   by all means.)



Studio Control panel 【a panel1appears lower part of the HUD】
(Regarding the operations of S@R Photo Studio Standard)


【SL1.Features and Forms of the Stand】
   Photo Studio Standard is consists of 2 to 3 prims. Please use them,
   if you want to save the prim number. Some functions are left out compere
   to the Pro Version. Though they have the function to change the Studio's
   size, which you cannnot find in the Pro Version.
   There are three kind of the form of the Standard Verson Studio, they
   are boxed, cylindar, and flat. Please use them for your utility purpose.

S@R Photo Studio Manual (E)

【SL2.change the size of the Stand / make the Stand invisible】
   If you choos hide / small / medium / large from the HUD of the
   Photo Studio Control Panel, the size of the studio will be changed.
   If you choose "Hide", the studio will be completely invisible.
   Moreover you can move up and down the standing position of the avatar
   according to the size of the stand.

S@R Photo Studio Manual (E)S@R Photo Studio Manual (E)S@R Photo Studio Manual (E)S@R Photo Studio Manual (E)

【SL3. The functions left off compare with Pro Version】
   1.All lightning functions
   2.Change of the aspect ratio (width, height) of the background picture.
   3.The function to move up and down the background picture.
   4.The function to move up and down the avatar.
   5.The function to show the initial screen.



同じカテゴリー(Product)の記事画像
S@R Camera Controller Manual J
S@R Photo Studio Manual (J)
Intelligent 2in1 HUD
Intelligent 3in1HUD Typing
Intelligent 4in1 HUD
Intelligent 3in1HUD Eyelash
同じカテゴリー(Product)の記事
 S@R Photo Studio (E) (2008-10-13 05:10)
 S@R Camera Controller Manual J (2008-07-16 15:46)
 S@R Camera Controller (J) (2008-07-16 15:44)
 S@R Camera Controller (2008-07-16 15:41)
 S@R Photo Studio (2008-07-16 15:00)
 S@R Photo Studio (J) (2008-07-16 12:50)

Posted by Shirousagi Noel at 11:11│Comments(0)Product
※このブログではブログの持ち主が承認した後、コメントが反映される設定です。
 
<ご注意>
書き込まれた内容は公開され、ブログの持ち主だけが削除できます。